Checklist

Nail Mani Pamper Session

Doing your nail at home must be a relaxed and enjoyable experience, so make sure to:

Put On Your Most Comfy Outfit

Have Some Tea Or Hot Chocolate

Turn On Some Background Music

Light Up Some Candles

& Most Importantly, Have Fun 😊

Checklist

Nail Mani Pamper Session

Doing your nail at home must be a relaxed and enjoyable experience, so make sure to:

Put On Your Most Comfy Outfit

Have Some Tea Or Hot Chocolate

Turn On Some Background Music

Light Up Some Candles

& Most Importantly, Have Fun 😊

Chrome Nail Manicure Kit Instructions

If this is the first time doing your nails, it’s crucial to carefully follow the instructions step by step, read the text and watch the videos listed below.

Customers experience disappointing outcomes when steps are rushed or not followed properly.

Is this your 2nd or 3rd time?

Follow this concise guide

If this is your second or third time doing your nails, follow this concise guide here’s a concise guide to remind you of the sequence. If any step feels unclear, please refer to the detailed instructions below to ensure perfect application.

Step By Step Tutorial

1

Step - Prep

Important:

This is a very important step because if you don’t prep correctly, your nails will start to lift later.

  • Don't wash your hands 60 minutes before the application.

  • Make sure your hands are completely moisturitzer & oil free.

What You Need:

Nail File

Cuticle Pusher

Powder Brush

OR

Prime It

(optional)

Steps

A:

Start by gently pushing back your cuticles using the cuticle pusher.

Why:

Pushing back your cuticles creates a clean, smooth nail surface for better polish adhesion. It also prevents infection and gives nails a well-groomed appearance.

Repeat this step on all nails.

B:

With the other side of the cuticle pusher, remove all dead tissue from the nail. Make sure there is no white tissue left.

Why:

If there is dead tissue left on the nail it can cause pre-mature lifting by preventing the base coat to adhere to the nail surface.

Repeat this step on all nails.

C:

Use the fine side of the nail file and file your nails in the desired shape.

Repeat this step on all nails.

D:

Now buff the entire nail plate with a VERY light pressure from the cuticle to the tip with the SMOOTH side (beige with Sassy Saints logo) of the nail file.

Don’t forget to file the sidewalls and the free edge (tip of the nail) to make sure the nail will adhere properly on all areas of the nail and not just one the side.

Once fully buffed, remove all dust with the powder brush.

Why:

This process is called ‘etching’ and will help the Two-in-One coat adhere much better.

However, don’t file too hard, the nail consists of around 100 layers, and filing too hard can remove approximately 30–50 of these, leading to damage, thinning, and increased sensitivity.

Repeat this step on all nails.

E:

Once you are done with the etching and your nails look all matt, apply the primer to your nails plate to prevent lifting.

Allow your nails to dry and from this point on avoid touching them to keep them clean.

Why:

If you now touch them with your fingertips, your nail plate will get oily again and this will undo all the prep you’ve done and will cause pre-mature lifting.

Repeat this step on all nails.

Optional

2

Step - Base & Dip

Very important:

  • Make sure to apply the recommended 4 THIN layers of ‘two-in-one coat’ + dip.This will make sure your nails have enough strength.

  • The 'Two-in-One coat ' sticks, so do NOT touch your skin. Also try not to touch the cuticle or skin to avoid premature cracking.

  • When you're not using the bottle make sure to put the lid back in the bottle to prevent the brush from going hard.

  • Coat 1 nail at a time and DIRECTLY dip your finger into the chrome base powder.

  • Where you apply the Two-in-One coat, the powder is going to stay, so apply the base coat evenly and ONLY at the nail plate, avoid your cuticle area at ALL costs.

What You Need:

Two-In-One Coat

Chrome Base Powder

Powder Brush

Cuticle Pusher

Steps

A:

Stir through the powder with your cuticle pusher.

Why:

This makes sure that there are no clumps in the powder and application will be smooth.

B:

Grab the two-in-one coat brush and swirl off any excess liquid in the neck of the bottle.

When taking the brush out of the bottle, stay on 1 side of the bottle only.

Why:

This helps to prevent product build-up in the bottle cap which could cause your bottle to get stuck and not being able to open it the next time.

Repeat this step every time you take your brush out of the bottle.

C:

Apply a thin & even layer of the two-in-one coat across the entire nail in long strokes with a light pressure.

Don’t forget to cover the sidewalls and cap of the free edge (tip of the nail).

Then dip your finger into the chrome base powder at a 45 degree angle (submerge the whole nail).

Tap off any excess powder and if any areas appear wet, then redip without applying more two-in-one coat. Your nails should look fully dry when you take them out of the pot.

Repeat this step on all nails.

D:

Dust off any excess powder with the powder brush.

Repeat this step on all nails.

E:

Take your cuticle pusher and clean up around the cuticles and around the sidewalls.

This to make sure the powder doesn’t come into contact with the skin.

Why:

When the nail grows the skin and cuticle do not grow alongside the nail and any product that has touched the cuticle or skin then has a bit sticking up where it was attached to skin and that is how lifting/cracking and chipping can begin.

Repeat this step on all nails.

F:

Repeat the application of the two-in-one coat + dip, 3 more times per nail. (Step B-E)

So you have 4 layers of two-in-one coat + dip per nail in total.

Why:

4 base layers + dip will ensure maximum durability and strength! If you apply only 2 or 3 layers, your nails are very likely to chip as there is not enough strength.

Also, if at the end of this your nails look a bit clumpy, don’t worry! We’re going to fix that in a bit!

3

Step - Harden

Important:

  • The Hardener is the solution that hardens the nails to prevent chipping & cracking.

  • This solution is skin-friendly, so don't be afraid to touch the skin with this liquid.

  • Make sure to apply this layer generously, VERY GENEROUSLY all over the nail plate. There is no such thing as too much hardener.

  • The free-edge of the nail is most likely to chip & crack because it's the most flexible, make sure to apply gently on the free-edge (see image).

  • Don't worry if your nails are not perfect, after this step we'll create the perfect shape.

Especially if it's your first time it can be a bit clumpy, but no worries, this will get better over time and 97% of our customers don't have any clumps after their 3rd try.

What You Need:

Hardener

Nail File

Powder Brush

Paper Towel

Steps

A:

Now apply a very generous layer of hardener over the entire surface of the nail and make sure to cover the sides and the tips thoroughly. You cannot use too much of this step. The hardener is safe for skin contact, so be generous and don’t be afraid to touch your skin.

Why:

The hardener initiates a reaction with the Two-in-One coat, solidifying the powder and forming a cohesive, hard surface that strengthens the nails and makes them more resistant to chipping or cracking.

Repeat this step on all nails.

Allow it to dry for 2 minutes.

B:

Now that the nail is hardened we are going to use the smooth side of your nail file to file over the entire nail surface smoothing out any bumps.

Make sure you take your time for the filing stage. Your nails should look 100% smooth and even after filing.

After you’ve filed them correctly, you dust away any dust with your powder brush

Repeat this step on all nails.

C:

Now that your nail is 100% even, you apply a 2nd layer of hardener, covering the sides and the tips again as well.

Repeat this step on all nails.

Allow it to dry for 2 minutes.

D:

To prevent the two-in-one coat brush to harden wash your hands in lukewarm water, dry them thoroughly and wait 3+ minutes before moving to Step 4.

4

Step - Top Coat

Important:

  • If your nails are still wet from the Hardener' your brush will harden so make sure your nails are fully dry.

  • When you're not using the bottle make sure to fully screw on the lid to prevent the brush from going hard.

  • The Two-In-One Coat sticks so do NOT touch your skin. Also try not to touch the cuticle or skin to avoid premature cracking.

  • And if you apply a too thick layer of the Two-In-One Coat a “blister” will occur, so prevent that as well. Work in thin layers.

Products Needed

Two-In-One Coat

Paper Towel

Steps

A:

Apply a thin layer of the two-in-one coat to your entire nail.

Repeat this step on all nails.

Allow it to dry for 2 minutes.

B:

Apply a 2nd layer of the Two-in-one coat to your entire nail.

Repeat this step on all nails.

Allow it to dry for 2 minutes.

5

Step - Chrome

Watch this Video Before Moving On:

Important:

  • Precise timing is crucial when applying chrome. Wait exactly 2 minutes to ensure the chrome top is dry enough for powder application but not so dry that it fails to bond effectively.

  • Pearl chrome is most effective on lighter undertones, while gold chrome achieves optimal results on deeper colors.

  • You can remove and reapply your chrome finish at any time. If the chrome begins to wear off, simply apply a fresh layer of chrome top and rub in a new layer of chrome powder.

Is this your first time?

Do 5A to 5C one nail at a time!

What You Need:

Chrome Applicators

Pearl Or Gold Chrome

Chrome Top

Steps

Is this your first time?

Do 5A to 5C one nail at a time + make sure to read and watch all the videos first before you start.

A:

Start with just your thumb!

Take the chrome top and apply a thin layer over the entire thumb nail plate. Make sure to not forget the side walls and top of the nails tip.

Set a timer for EXACTLY 2 minutes

B:

Dip the chrome applicator in the chrome dust and gently rub over the entire thumb nail surface EXACTLY 2 minutes after you applied the Chrome Top.

It’s really important

  • To have plenty of chrome dust on the chrome applicator

  • Not to apply too much pressure.

Simply make sure you add a nice thin layer of the chrome dust on the entire nail.

Now the nails should resemble a nice sheen, this is the chrome effect.

C:

Wipe off any excess chrome with the clean side of your chrome applicator and make sure to really rub it in.

D:

Now repeat 5A to 5C on all nails one at a time.

E:

Now we’re going to apply a 2nd layer of chrome and we’ll repeat the process by starting with the thumb again.

Take the chrome top and apply a thin layer over the entire thumb nail plate. Make sure to not forget the side walls and top of the nails tip.

Set a timer for EXACTLY 2 minutes

F:

Dip the chrome applicator in the chrome dust and gently rub over the entire thumb nail surface EXACTLY 2 minutes after you applied the Chrome Top.

G:

Wipe off any excess chrome with the clean side of your chrome applicator and make sure to really rub it in.

H:

Now repeat 5E to 5G on all nails one at a time.

6

Step - Optional

Products Needed

Nourish It

Steps

A:

Nourish the cuticles & skin with cuticle oil

Why:

Nourishing the cuticles and skin with cuticle oil keeps them hydrated and healthy, preventing dryness and cracking. It also enhances nail strength and flexibility, promoting overall nail health and a well-groomed appearance.

Repeat this step on all nails.

Et Voila, You’ve Created A Beautiful Chrome Manicure From Home!

Join The 25,000+ Members Sassy Saints Facebook Community

JOIN GROUP