Sassy Saints Lash Tint Tutorial

If this is your first time, please read all instructions thoroughly.

  • Follow this step-by-step guide to achieve perfectly tinted lashes at home. Whether you want a natural enhancement or bold lashes, this tutorial will walk you through the process with ease. Let’s get started!

Patch Test (Safety First!)

Why it's important:

Performing a patch test ensures that you won't have an allergic rection to the product.

  1. Mix a small amount of lash tint and oxidant (1:1 ratio) on the mixing plate.

  2. Apply a tiny amount of the mixture to the inner elbow or behind your ear.

  3. Leave it on for the recommended time (see flowchart), rinse, and monitor the area for 24 hours.

  4. If redness, swelling, or irritation occurs, do not use the product.

Precautions for Tinting Your Lashes

  • Remove Contact Lenses:

    Take out contact lenses before the procedure to prevent irritation.

  • Avoid Sensitive or Inflamed Areas:

    Don’t tint lashes if the skin around your eyes is irritated or inflamed.

  • Avoid Water and Makeup:

    For the first 24 hours, avoid washing your lashes or applying makeup to let the tint set properly.

  • Protect from Heat and Chemicals:

    Avoid steam, saunas, and harsh treatments for 24-48 hours to prevent premature fading.

  • Hydrate:

    Apply a hydrating serum after 24 hours to keep lashes healthy.

What You'll Need:

Gather these supplies to ensure a smooth and hassle-free process:

  • Lash tint

  • Oxidize it

  • Mixing plate

  • Applicator brush

  • Under-eye pads

  • Cotton pads

  • Lukewarm water

  • Vaseline (or fatty cream)

  • Cotton buds

Cleanse and Protect

1. Cleanse Your Lashes:

  • Remove all makeup or oils using a cotton pad and makeup remover.

  • If you used an oil-based remover, follow up with a cotton pad and water to eliminate residue.

  • Allow your lashes to air dry completely.

2. Protect Your Skin:

  • Apply Vaseline around your eyes using a cotton bud, avoiding contact with your lashes.

  • If Vaseline touches your lashes, cleanse again to ensure the tint develops properly.

3. Prepare for One Eye at a Time:

  • Apply Vaseline and under-eye pads to the first eye, ensuring the pads are close to the lash line without covering your lower lashes.

Prepare the Tint

1:1 Ratio:

  • Mix one part lash tint with one part oxidant on your mixing plate (e.g., one pump of each).

  1. Stir until the mixture has a smooth, creamy consistency.

    Pro Tip: Only prepare enough tint for one eye at a time.

Your Guide To Perfect Lashes

10 min

Ratio:

1 pump Black

1 pump Oxidize It

Step By Step Tutorial

Now comes the fun part!

STEP 1

Apply The Tint

Follow These Steps:

  1. Close your eye and keep it closed throughout the process.

  2. Use the angled side of the applicator brush to coat your lashes from root to tip.

  3. Work quickly but carefully, ensuring every lash is covered.

  4. Use a cotton bud to clean any tint that gets on your skin.

Set Your Timer:

Start timing as soon as the tint touches your lashes. Refer to the flowchart for the correct processing time for your hair type.

How to Use the Bio-Microneedling liquids:

1

Take your small mixing bowl and combine the Bio-microneedle Liquid with the Bio-microneedle Powder.

2

Use the applicator brush, start applying a first layer to your skin and massage it in. Use your fingers to massage the paste into your skin using circular motions. You will feel a tingling sensation. The mask can dry quickly, so continue applying more layers until you’ve used all the paste. Massage in each layer and be sure to avoid the eye area. Massage the product in for at least 5 minutes.

3

Now, Leave the mask on for 15 minutes without further massaging. Until it’s fully dry.

Then, wash the mask off with lukewarm water, taking care not to get any in your eyes. Ensure your face is completely free of the mask after washing.

STEP 2

Processing Time

About the Collagen Sheet Mask:

Processing Time:

Follow the recommended time in the flowchart based on your hair type.

Pro Tip: You’ll notice the tint darken as it processes—this is normal.

How to use the Collagen Sheet Mask:

Open the collagen sheet mask, unfold it, and place it onto your face for 15 minutes. Afterward, remove the mask and massage the remaining residue into your skin with clean hands.

STEP 3

Remove the Tint

About the Revitalising Glow Serum:

Follow These Steps:

  1. Once your timer goes off, use a cotton bud to remove most of the tint with downward swiping motions.

  2. Gently wipe away remaining tint with a cotton pad soaked in lukewarm water, ensuring you clean the bottom lashes as well.

  3. Repeat with fresh cotton pads until they come away completely clear.

What to Expect:

  • Your vision may feel slightly blurry after opening your eyes—this is normal.

  • A brief stinging sensation (less than 30 seconds) can occur if tint seeps into your eyes. Rinse with water if discomfort persists.

  • For any stains on your skin, use an oil-based makeup remover.

How to use the Revitalising Glow Serum:

Apply 3 pea-sized drops of serum from the syringe onto your hands and massage them into your skin.

Continue applying the serum on the day of application and the following day, both in the morning and evening.

Aftercare Tips

It's time to let the magic happen. In the coming days, you’ll likely notice:

  • After using our facial kit, you can expect smoother skin texture, improved tone, reduced fine lines and wrinkles, minimized pores, and improvements in sun damage and hyperpigmentation.

  • To maintain your tint:

  • Avoid Water

    : Keep your brows dry for 24 hours to let the tint set.

  • No Makeup

    : Skip brow makeup for the first 24 hours.

  • Use a Brow Serum

    : Apply a brow serum regularly to keep your brow hairs nourished, hydrated, and healthy.

  • Avoid Heat

    : Stay away from saunas, steam, and sun exposure for 48 hours.

  • Don’t Touch

    : Refrain from rubbing or scratching your brows.

Skip Exfoliation

: Avoid harsh scrubs or skincare on the brow area.

Aftercare:

To maintain your lash tint:

Avoid Water: Keep your lashes dry for 24 hours to let the tint fully set.

No Makeup: Skip mascara or eye makeup for the first 24 hours.

Avoid Heat: Stay away from saunaus, steam and hot showers for 48 hours.

No Rubbing: Avoid touching or rubbing your eyes and lashed.

No Curling: Do not use an eyelash curler for at least 24 hours.

Skip Oil-Based Products: Avoid oil-based makeup removers or cleansers on lashed, as they can cause the tint to fade more quickly.

Use a Lash Serum: Apply a lash serum regularly to keep your lasheds hydrated and stong.

Be Gentle: Use a gentle cleanser around the eyes to avoid disrupting the tint.

Maintenance Schedule:

For best results, reapply the tint every 4 to 6 weeks.

That’s it! Enjoy your new tinted lashes!!

You’ve now learned how to achieve perfectly tinted lashes at home. Enjoy your enhanced lashes and the confidence that comes with them! Thanks for following along and enjoy your new lashes!